Project cars 3 patch notes android#

See the general troubleshooting section here for additional troubleshooting tips Please ensure you have read the 'IMPORTANT' notice in the Project CARS 3 - Interface Setup (UDP) section above, regarding telemetry lag. You also need to set your Project CARS 3 UDP Frequency to 4. Try enabling the 'Legacy NetCode' option in RS Dash v1.9p (or newer). Verify that your wireless devices are connected using the same Wifi frequency (2.4Ghz or 5Ghz) as your gaming machine if that is also connected wirelessly. Verify that your device is connected to the same Wifi network as your gaming machine. Lag issues can sometimes be resolved by slowing down the UDP rate, try using UDP 4 if you are experiencing telemetry lag to see if that helps. PC users experiencing issues can switch to shared memory mode to resolve this issue.Įnsure that you have followed the steps above to configure the interface correctly. If you are experiencing lag issues, please check your router settings and try disabling settings such as 'UDP Flood Protection', 'DOS (Denial of Service) Protection', 'Multicast Flood Protection' or similarly named. This will result in telemetry lag or possibly even no telemetry feed at all (in rare cases).

Project cars 3 patch notes android#

This means it will work with multiple devices by default, however please be aware that some Android devices and some wifi routers will have trouble processing the telemetry when it is sent this way. IMPORTANT: Project CARS 3 only supports outputting its UDP telemetry as a network broadcast. Once it is resolved we will endeavour to include support for this protocol option and these instructions will be updated to include the new option. A bug report has been filed with Slightly Mad Studios for this issue. Note: RS Dash currently uses the 'Project CARS 1' UDP protocol as the newer 'Project Cars 2' UDP protocol currently contains a bug (as of PC3 release) that prevents it from being usable by RS Dash.